Product appearance shown for model identification.
LG ENERGY SOLUTION · 18650 Series
LG 18650-M32
An 18650 option for space-constrained pack layouts
Match the complete model marking and revision before approving a substitution in an existing pack.
Discuss this model on WhatsApp ↗For OEMs, battery pack manufacturers and industrial buyers.
MODEL OVERVIEW
LG 18650-M32 — Selection & Sourcing
LG M32 is a 3200mAh nominal 18650 battery cell with 3100mAh minimum capacity and 3.69V nominal voltage in the reviewed promotion specification. Its current limits change with temperature: the 6A continuous value applies at 10–25°C, while 10A is a peak lasting less than ten seconds. For robotic lawn mower packs or portable instruments, compare the repeated duty cycle and charging schedule with those conditions. The document is preliminary, so the released LG M32 datasheet should be confirmed before the design or purchasing specification is approved.
For an OEM battery pack, provide the series and parallel arrangement, continuous load, peak duration and charging schedule. That information makes it easier to compare usable energy, thermal behavior and the required protection settings. Qualification should reflect the finished equipment rather than a single headline rating.
BK Energy can discuss LG 18650-M32 wholesale sourcing with your purchasing team. Include the sample quantity, expected production volume, delivery destination and documents needed for supplier approval so the quotation addresses both technical and commercial requirements.
TECHNICAL REFERENCE
Specifications & Operating Conditions
Read each value with its test conditions. Confirm the applicable document revision before design approval.
| Model / catalog code | LG 18650-M32 |
|---|---|
| Cell format | 18650 Series |
| Nominal capacity | 3200 mAh |
| Minimum capacity | 3100 mAh |
| Nominal voltage | 3.69 V |
| Standard charge current | 1.55 A |
| Charge voltage | 4.2 V |
| Charge termination current | 50 mA |
| Standard discharge current | 0.62 A |
| Discharge cut-off | 2.5 V |
| Maximum diameter | 18.4 mm |
| Maximum height | 65.2 mm |
| Weight without washer | 45.0 ± 1.0 g |
| Conditional operating limit | Charge: 1.55A at 0–10°C; 3.1A at 10–50°C |
| Conditional operating limit | Continuous discharge: 1.55A at -20–10°C; 6A at 10–25°C; 4.65A at 25–60°C |
| Conditional operating limit | 10A peak for under 10 seconds at 0–60°C |
Specification basis
LG INR18650M32 specification — PS-CY-INR18650M32-Promotion-V0. Promotion document explicitly NOT final. Never label as 10A continuous. 500 cycles >=70% with 0.5C/0.5C, 4.2–2.75V at 25°C; 1000 cycles >=80% uses different 4.1–3.0V, 0.3C/0.5C test.
View manufacturer reference ↗APPLICATION REVIEW
What to Check for Your Pack
For these project types, compare the continuous load, repeated peaks, charger settings and measured pack temperatures with the exact cell revision.
- Energy and load: usable energy, continuous current, peak duration and charging opportunities.
- Mechanical and thermal fit: the exact drawing, connections, enclosure temperature and cooling arrangement.
- Qualification: a test plan based on the finished equipment, including its protection settings and required approvals.
PROCUREMENT DOCUMENTS
Datasheet, Traceability & Certificates
Ask for the specification and drawing that match the offered lot. If your project needs a UN 38.3 test summary, SDS or a particular cell certificate, include that requirement in the enquiry.
BUYER QUESTIONS
Before You Order
Is this cell suitable for my application?
For these project types, compare the continuous load, repeated peaks, charger settings and measured pack temperatures with the exact cell revision. Application names on this page are evaluation starting points, not a claim that an OEM has approved this exact cell.
Can I get the LG 18650-M32 datasheet?
Yes—send the complete model code and your project requirements. We will review the matching specification and available documentation with you. Any preliminary values should be confirmed before production approval.
What are the wholesale price, MOQ and lead time?
These are quoted for the requested model, quantity, available lot and destination. Send sample demand and expected production volume so the offer can address your schedule.
Which documents should accompany the order?
Ask for the applicable specification revision, lot identification, SDS and UN 38.3 test summary, plus any model-specific certificates required for your market. Cell documents do not replace finished-pack or equipment approval.
Compare Other 18650 Series
Compare exact specifications; a similar format does not mean the cells are interchangeable.
